Alaska Department of Transportation and Public Facilities, Attention: Brett Nelson, 2301 Peger Road, Fairbanks, AK 99709, Brett.Nelson@alaska.gov, 907-451-2238, stated purpose is to upgrade existing aviation facilities at Saint Mary’s Airport to meet current FAA safety and capacity guidelines. Discharge 37,000 cubic yards of gravel into 2.6-acres of wetlands to construct the following: Resurface unpaved Runway 17/35 and extend the Runway Safety Area’s (RSA’s) length north by approximately 450 feet. Resurface unpaved Runway 6/24 and widen existing RSA embankment by approximately 35 feet and extend embankment approximately 60 feet beyond the existing embankment of the west end of Runway 6. Resurface unpaved Taxiways A and B, the transient apron, and the unpaved portion of the main apron. Repave the main asphalt apron. Replace navigation aids. Construct drainage improvements. Replace and widen two culverts on the Yukon River Access Road. Rehabilitate airport lighting. All work would be performed in accordance with the enclosed plan (sheets 1-9), dated December 1, 2021. The project site is located within Section 19, 24, 25, and 30, T. 23N., R. 76W; Kwiguk A-3; Seward Meridian; Latitude 62.060833º N., Longitude 163.301833º W.; in Saint Mary’s, Alaska. Please contact Janet Post at (907) 753-2831, toll free from within Alaska at (800) 478-2712, by fax at (907) 753-5567, or by email at janet.l.post@usace.army.mil if further information is desired concerning this notice.