Kenai Landing, Inc stated purpose is to meet the growing need for marine transportation and shore-based services, including “roll-on”, “roll-off” freight storage and handling. Kenai Landing, Inc proposes to excavate 10,000 cubic yards (cy) of silty clay from below the mean high water mark (MHWM, 19.8 ft elevation) of the Kenai River, from an area 145 feet long and 80 feet wide in order to construct a 80 foot wide by 380 foot long boat ramp. The work would occur when the water levels are low, and an excavator would be used to remove the material. The dredged area would slope down from the MHWM to 0 ft. All work would be performed in accordance with the enclosed plan (sheets 1-5), dated September 7, 2013. Please contact Andy Mitzel at (907) 283-3519, by fax at (907) 283-3981, or by email at andy.mitzel@usace.army.mil if further information is desired concerning this notice.
POA-2003-1509, Kenai River_PN
POA-2003-1509, Kenai River_PN Drawings